Twist it till it snaps
Another day, another tutorial! This time we’re removing a taillight of the RCZ. If you want to order it before you read or watch through the process, here are the part numbers. Peugeot part number: YM40701280, Automotive Lighting part number: 2623 0102. Always make sure you’re ordering the correct side, since the left and the right units are symmetric, hence not identical.
In a nutshell, the entire process is quite simple. It can however be confusing when you’ve never done it before. Open up the cover on the side of the trunk and disconnect the cable. There is only one cable coming from the taillight. After that there are two big white nuts to unscrew. The first time I tried to loosen them they were so tightened up that I needed pliers.
Push the taillight out from the inside and twist the entire unit counter clockwise until the burl in the front of the light snaps out of its position. I sounds like something just broke but don’t worry, it’s really just the burl. You may want to cover the left edge of the taillight with some sort of cloth so you don’t scratch it while removing it. However, it’s not necessary if you’re careful.
No just press and pull the rubber plug, pull the cable out and the entire taillight is free. Check out the video for a more comprehensive demonstration:
Leave a Reply