Search

Tag

France

DAB+ antenna – installation & setup

Reach for the satellites

Time goes on and with that technology evolves or at least changes. Sometimes for better, sometimes for worse. 😉 The fact is that in Europe, the classic AM/FM radio has reached the beginning of its end. Depending on in which country you live, AM/FM radio transmission either already has stopped or will seize to exist within the first half of the 2020’s. Some countries actually intend to keep it up. However, in order to be prepared for the day after, I have decided to install a Digital Audio Broadcasting antenna to hook up to the android autoradio of my RCZ. Here’s how to install it and set it up! 🙂

Installing a FOX sports exhaust – Peugeot RCZ

The first really significant modification to my RCZ

Enough of the routine maintenance, let’s get some excitement into this ride. The K&N air filter was a good start, but why not upgrade the RCZ esthetically while also improving the sound note?! I decided to install a FOX dual exhaust for three reasons: It looks great – chrome, classy and bigger than the stock exhaust – hopefully sounds great and it’s road legal in Switzerland. Furthermore, I went all in and also acquired a matching sporty rear diffusor that allows the new right side exhaust to come out.

NOTICE: The installation is quite straightforward. As always, take some time to prepare yourself and don’t rush the whole disassembling an reassembling. The kit was complete. You don’t need to cut or weld anything to the chassis. However, you need to cut the stock exhaust pipe at the exact spot, in order for the new pipe to fit. More tips are given at the end of part 2.

Here’s how it’s done! 🙂

Part 1 – Removing the original exhaust and prefitting the FOX exhaust

Part 2 – Final assembly, sound check and feedback

Resetting the service warning message – Peugeot RCZ

Keep your computer up to date!

So you’re one of those people who service and tune up your car yourself, right? But what about all the electronic little messages that come up periodically and want to remind you to look after your car? Of course, YOU wouldn’t need that because YOU keep track of your car’s maintenance history, right? Well guess what, you still need to tell you car when you changed the oil. My RCZ‘s onboard computer wants me to service my car every 30’000 km. It shows so buy putting up a little wrench next to the odometer, as well as in the central display between the rpm gauge and the speedometer.

Lucky you, you drive a Peugeot and hence don’t need any diagnostic computer to reset the service warning message!

Here’s how to do it! 🙂

Removing the taillight on my Peugeot RCZ

Twist it till it snaps

Another day, another tutorial! This time we’re removing a taillight of the RCZ. If you want to order it before you read or watch through the process, here are the part numbers. Peugeot part number: YM40701280, Automotive Lighting part number: 2623 0102. Always make sure you’re ordering the correct side, since the left and the right units are symmetric, hence not identical.

Left taillight cover, 2012 Peugeot RCZ
Left taillight cover, 2012 Peugeot RCZ

In a nutshell, the entire process is quite simple. It can however be confusing when you’ve never done it before. Open up the cover on the side of the trunk and disconnect the cable. There is only one cable coming from the taillight. After that there are two big white nuts to unscrew. The first time I tried to loosen them they were so tightened up that I needed pliers.

Left taillight, 2012 Peugeot RCZ
Left taillight, 2012 Peugeot RCZ

Push the taillight out from the inside and twist the entire unit counter clockwise until the burl in the front of the light snaps out of its position. I sounds like something just broke but don’t worry, it’s really just the burl. You may want to cover the left edge of the taillight with some sort of cloth so you don’t scratch it while removing it. However, it’s not necessary if you’re careful.

No just press and pull the rubber plug, pull the cable out and the entire taillight is free. Check out the video for a more comprehensive demonstration:

 

2012 Peugeot RCZ

The concept

The RCZ started its life as one of many beautiful concept cars of Peugeot at the 2007 International Motor Show Germany – the IAA (Internationale Automobil-Ausstellung). Most of those concept cars never make it into production, but this one got such a good feedback and looked already production ready. So Peugeot made the brave decision and put it into production.

2007 Peugeot 308 RCZ
2007 Peugeot 308 RCZ

Anyway, the moment I saw this car on the internet I wanted it. Growing up in a family that had always had at least one Peugeot at a time (505, 406, 406 coupé, 307 SW) I always had somewhat of an emotional connection with the brand, but most of them were more appealing to the sensible driver rather to the passionate gearhead / petrolhead.

2007 Peugeot 308 RCZ
2007 Peugeot 308 RCZ

Then, two years later, Peugeot presented the production version of the RCZ. They dropped the “308” in order not to have people remind it of the the more functional model it is technically based on, making it the first Peugeot road car to have a model type name consisting of letters, rather than the typical three digits with the “0” in the middle.

The real deal

2012 Peugeot RCZ
2012 Peugeot RCZ

After the presentation of the road going version in the fall of 2009, production started in 2010 at the Magna Steyr plant in Graz, Austria. I knew that one day I would have to own one. Little did I know that that day would already come by the end of 2012. Yes, I’m fortunate enought to call the nacre white one you see on the left my own. By the way, you might already have noticed that I used this car as the official MotorScotti logo. 🙂

2012 Peugeot RCZ
2012 Peugeot RCZ

This one is the 200 hp (147kW) version. I’ve had it since November 2012 and I’m absolutely delighted! Being the GT version it comes with the improved suspension and smaller steering wheel compared to the base 156 hp model.

2012 Peugeot RCZ
2012 Peugeot RCZ

The main reason why I wanted the RCZ is obvious: the look. I could spend hours just looking at it!! The double bubble glass roof and the two aluminum side rails are without a doubt the trade marks of this car, that add to the overall curvaceous and nicely balanced proportions.

2012 Peugeot RCZ
2012 Peugeot RCZ

The 19” Solstice wheels, the full leather interior (although I believe this one’s dashboard is not covered in real leather) and all of the equipment; electric and three way heated driver & passenger seats, bluetooth connectivity, front and rear parking sensors, automatically dimming interior mirror, xenon directional headlamps, hill assist etc.

Solstice 19'' Matt Black Onyx wheel, 2012 Peugeot RCZ
Solstice 19” Matt Black Onyx wheel, 2012 Peugeot RCZ

A part from the equipment, the inside is just as nice to look at as the exterior – just look for yourself.

Optional aluminum gear lever, 2012 Peugeot RCZ
Optional aluminum gear lever, 2012 Peugeot RCZ
Full leather dashboard, 2012 Peugeot RCZ
Full leather dashboard, 2012 Peugeot RCZ
First generation Peugeot 308 interior
First generation Peugeot 308 interior

Okay, the dashboard looks very similar to the one of the 308. However, it’s not the same. It differs from the 308’s in the back and instead of having three central vents, the middle one is replaced with a very classy analog clock.

Full leather front seat, 2012 Peugeot RCZ
Full leather front seat, 2012 Peugeot RCZ

My car is pretty much stock. The only thing I changed was the gear lever. The original fake leather was not bad, but this optional full aluminum one looks so much more premium and sportier and makes the whole driving experience even more engaging. Being metal, it heats up quickly in the summer, so just be aware of it as you park the car in the sun for a couple of hours.

2012 Peugeot RCZ
2012 Peugeot RCZ

I’ve read and watched many reviews on this car and to it’s main competitor; the second generation Audi TT. In most cases, the Audi won, but were they (1) really comparable and (2) really objective about what the journalists said? I don’t care, I love the RCZ for its style, performance, ride and build quality. Yes, it everything inside is well put together and solid.

Passenger door, 2012 Peugeot RCZ
Passenger door, 2012 Peugeot RCZ

The only thing that is left for me to improve the style are the center elements of the door trim. On this pre-facelift models, it’s simply plastic, despite all the parts around it are wrapped in leather. The facelifted model has this part covered in stitched leather…Peugeot could have done that right away, don’t you agree? My plan is to have that wrapped in leather, too. So stay tuned. ;-).

Instrument cluster, 2012 Peugeot RCZ
Instrument cluster, 2012 Peugeot RCZ

Furthermore, this car is surprisingly practical. The trunk space is huge (321 l). You can even fold down the rear seats and have even more space (639 l). Obvisously, this car wasn’t build to compete with Peterbilt and Freightliner. However, I like to cool it the station wagon of the coupés.

Anyway, the important thing is to look at the entire package. The ride is a little jittery in town, but excellent everywhere else. The chassis keeps the car nicely on track with just very little understeer, the sports seats also hold you firmly in place. I did four laps of the infamous Nürburgring Nordschleife this April. Obvisously, I’m far from being an amateur race driver. But still, this car sticks to the road like glue. Finally, dressed up in that silhouette, this car is already a collector car. This is accentuated by the fact that it went out of production on 18 September this year. Peugeot say they won’t replace it anytime soon. But you know what? It doesn’t need to – although it starts to show its age in terms of connectivity and other infotainment gadgets, this car is at least as desirable today as it was the day it was first presented to the public.

WordPress.com.

Up ↑