Search

MotorScotti

Category

United States

Getting parts for KITT – Part 2 – Knight Rider parts

Getting parts for the restoration of your Firebird is one thing, eventually you want to get some of the Knight Rider specific parts. Look no further, as I’ve put together a list of vendors that you can check out and get different variations of the same type of products.

Getting parts for KITT – Part 1 – Firebird parts

If you’re gonna build your KITT replica, you’re gonna need parts. Some more, some less, depending on the general condition of your Firebird and depending on how far your want to go with the project. This usually correlates with the time and budget you have to get it done. Long story short, I would advise you to start with the mechanical part, the actual restoration of the car before diving into the specific Knight Rider related parts.

Here’s my take on where to find parts to restore your Firebid…and also several other american icons.

3rd Gen Firebird – Removing the body panels

Whether you want to turn your third gen Firebird into a full KITT replica or just take some body panels off to repair or replace them, it’s always good to know how to proceed and go about that.
Well, since I am pretty particular about the appearance of my KITT and the level of quality that had to go into ‘him’ in the process of restoration, I took off the hood (bonnet in Queen’s english), the fenders, the front and rear bumper, as well as the mirror. None of these parts are particularely difficult to remove, at least not if you do it in the order I did and already removed the inside plastics. I’m saying that because the removal of the rear bumper just takes a bit of time. Why? Well I’m not gonna tell you just like that, I want you to watch the video, of course. πŸ™‚

3rd Gen Firebird & Camaro – Gutting the interior – Part 2

Here we go! After I went through how to remove the seats, seatbelts and interior plastics in Part 1 back in June, it’s now time to show you how to gut the rest of the interior, namely the steering wheel, the dashpad, the gauge cluster, the center console, as well as the carpets.

That’s about as far as most people will have to go if your car is not damaged in a certain way that you might have to go any further. Anyway, if you clear all of that stuff out of your way you can take care of the inner foundations of your third gen F-Body. For my Firebird that meant: sound deadening, new speakers, new carpets, new seat belts, painting the plastics tan and having the seats, door panels and headliner reupholstered and in some cases strenghtened. But that will come in a few later episodes. Enjoy this part for now! πŸ™‚

Pontiac Firebird Trans Am – Knight Rider KITT – Full restoration

This is a video I’ve been wanting to do since I first drove KITT home. I’m compressing the entire (almost) restoration and conversion of my Pontiac Firebird Trans Am KITT in one video. I say almost because this isn’t the of it. I’m still working on mechanic and appearance improvements. This way, it will give you an idea of the extent of work and the amount of video footage that’s gone into restoring this car and transforming it into my own KITT.

After this video, I plan on continuing publishing the countless videos on the restoration process, as well as including visits to car shows, driving sequences and just fun stuff. Hope you enjoy it! πŸ™‚

2019 Goodwood Festival of Speed

Good Festival of Speed!!! 2019 year is the year I finally seized to opportunity to attend it. Well, my fiancΓ©e gave me tickets as my Christmas present 2018 πŸ™‚ and off we went. it was an amazing experience; from the trip through the south of England, our airBnB host and of course the Festival of Speed itself. I can highly recommend it. Long story short, I’ll let you watch the video down below rather than writing a novel.

3rd Gen Firebird & Camaro – Gutting the interior – Part 1

When I started my Firebird KITT project back in the second half of 2017, the first big part was to remove the seats and all of the interior panels to be reupholstered and have my front seat back rests modifyied to look like the original PMD version they had in the early Trans Am and logically, in KITT.

The car remained without seats and panels until I got it back from the body and paint shop. Then I went even further to remove the seat belts, the center console, dash and carpets.

Here’s the first part of how to go about that!

Update on KITT & My advice on project cars

Originally I had in mind to dive into all the restoration videos around Christmas. Even though I have made significant progress in KITT since, I was too busy to edit a significant amount of videos. Meanwhile, I opened an Instagram account and started showing the current progress on KITT, which created a bit of a gap between the original presentation of the Firebird and the current status of the car.

Long story short, here is the March 2019 update of KITT. Enjoy the video!

Pontiac Firebird KITT – Fuel system overhaul

What some could consider as being part of the basic maintenance, I decided to make it a separate video. Whereas changing the fuel filter is fairly easy on these thirdgens, getting to the fuel pump is a bit more tricky. Not super hard but it requires you to lift the car and drop the tank, as there is no fuel trap door to access to it from the inside of the car…at least not from the factory. Enjoy the video!

 

WordPress.com.

Up ↑