In this third and final repair episode of the KITT Trans Am series I’m going through changing the rear inner impact bumper, painting a KNIGHT INDUSTRIES logo on the air filter lid, swapping out the old indicator stalk with a brand new unit, installing T-Top sunshades, as well as replacing the broken T-Top drips rails and the respective weatherstrips with new ones. There’s even a little extra, watch the video till the end and you’ll find out!
In this episode I’m going through the transmission oil & filter change, the differential oil change, as well as the replacement of the track arm and rear control arm bushings.
In this episode I’m showing you how turned the factory grey interior of my KITT Trans Am into the now beautiful tan interior. Please note that this is one of several different options you can choose and that ultimately the method is up to each individual’s taste and budget.
In this episode I’m showing you why I didn’t go with screen accurate front lights and how I installed the DRL and fog lamps. Ever since I’ve posted videos showing the complete front end with the lighting setup, various people have been commenting and asking why I did it the way I did and not build a more screen accurate version. Wanna know why? Watch the video! 🙂
In this video I’m going through the installation of my new radio, the inside, as well as engine bay speakers and how I connected the radio with the scanner control box together using a sound mixer. In short, the sound system. Check it out! 🙂
In this video I’m going through the body and paintwork that went into my KITT Trans Am. It’s not one of my typical how to videos, but more like the story of how everything came together, what to pay attention to and what to look for when searching the right body and paintshop. I’m also giving you some tips regarding the installation of new T-Top seals.
You’re building your KITT replica and you’re looking to get the correct, screen accurate wheels? Or maybe you’re open for something not completely screen accurate but similar?
Worry no more, episode 16 of my KITT Trans Am restoration covers all of that and a lot more. I’ll even show you how I restored my rims. This episode is jam packed with wheel information with the respective sources. Watch it now! 🙂
In this time of global Corona / Covid-19 pandemic, many people are asked to stay at home. You might be busy, you might be scared, you might also be a little bit bored and if you are a car person, just waiting for the day you can enjoy your freedom again and take your car out for a drive and to your next car meeting.
Therefore I’ve made this little montage of some footage we’ve taken over the past year of KITT driving around. For everyone who has to stay at home and misses the freedom of just going for a drive. Hang in there and stay safe everybody!
The undoubtedly most iconic piece of Knight Rider and maybe even of the 80s is KITT’s wooshing scanner. If there is one thing that cannot miss and must be done right in any KITT replica, it is the scanner. It would definitely be cool if the so called scanner could actually scan its environment, just like KITT did on the show, but unfortunately it’s just a light bar with a trailing effect.
In the following video I’m showing you what type of scanner I’ve chosen for my KITT and how I installed it. Furthermore, I’m giving you an overview of what the current option are and what you should consider before you pick one. Enjoy the video!