Search

MotorScotti

Tag

KITT

Getting parts for KITT – Part 2 – Knight Rider parts

Getting parts for the restoration of your Firebird is one thing, eventually you want to get some of the Knight Rider specific parts. Look no further, as I’ve put together a list of vendors that you can check out and get different variations of the same type of products.

Getting parts for KITT – Part 1 – Firebird parts

If you’re gonna build your KITT replica, you’re gonna need parts. Some more, some less, depending on the general condition of your Firebird and depending on how far your want to go with the project. This usually correlates with the time and budget you have to get it done. Long story short, I would advise you to start with the mechanical part, the actual restoration of the car before diving into the specific Knight Rider related parts.

Here’s my take on where to find parts to restore your Firebid…and also several other american icons.

3rd Gen Firebird & Camaro – Gutting the interior – Part 2

Here we go! After I went through how to remove the seats, seatbelts and interior plastics in Part 1 back in June, it’s now time to show you how to gut the rest of the interior, namely the steering wheel, the dashpad, the gauge cluster, the center console, as well as the carpets.

That’s about as far as most people will have to go if your car is not damaged in a certain way that you might have to go any further. Anyway, if you clear all of that stuff out of your way you can take care of the inner foundations of your third gen F-Body. For my Firebird that meant: sound deadening, new speakers, new carpets, new seat belts, painting the plastics tan and having the seats, door panels and headliner reupholstered and in some cases strenghtened. But that will come in a few later episodes. Enjoy this part for now! 🙂

Update on KITT & My advice on project cars

Originally I had in mind to dive into all the restoration videos around Christmas. Even though I have made significant progress in KITT since, I was too busy to edit a significant amount of videos. Meanwhile, I opened an Instagram account and started showing the current progress on KITT, which created a bit of a gap between the original presentation of the Firebird and the current status of the car.

Long story short, here is the March 2019 update of KITT. Enjoy the video!

Pontiac Firebird KITT – Fuel system overhaul

What some could consider as being part of the basic maintenance, I decided to make it a separate video. Whereas changing the fuel filter is fairly easy on these thirdgens, getting to the fuel pump is a bit more tricky. Not super hard but it requires you to lift the car and drop the tank, as there is no fuel trap door to access to it from the inside of the car…at least not from the factory. Enjoy the video!

 

Pontiac Firebird KITT – Basic Maintenance

As KITT is already back from the body and paint shop and the enterior is almost finished as well, it’s time to remind myself that I haven’t showed much about the entire restoration process so far and that I should start at the beginning. Hence, here is a video about the basic maintenance I did on my 1990 Pontiac Firebird with the 305 V8 engine, the L03 TBI version. This would apply for most thirdgen Pontiac Firebird or Chevrolet Camaro, as they were basically the same cars with the exception of the front and the rear design. Enjoy the video!

Build Plan – Pontiac Firebird KITT – Knight Rider project

KITT created – step by step

KITT is in the making, the phoenix will rise from the ashes and glow of passion. But first things first. In order to make such a project happen, you need to make several packages and line them up on a timeline, basically create a plan. That’s right, and here it is: the build plan for my KITT, from start to finish. Keep you scanners peeled and watch carefully! 🙂

Why KITT? How I got my Firebird – Knight Rider project

The spark that started a passion for cars

Before going into the deep ends of the engine bay of my Pontiac Firebird KITT project, let me take a few minutes and explain to you why I’m doing this project in the first place and what it actually means to me. Sit back and enjoy the video! 🙂

Channel Update

Big change ahead

It’s been almost half a year since my last Youtube video and there are several reasons for it. The main one being the fact that I started working on the restoration of my third generation Pontiac Firebird. Parallel to its restoration I intent to convert into a replica of the KITT, the Knight Industries Two Thousand of the 80’s TV show Knight Rider.

Moving from the RCZ to the Firebird will undoubtedly shift the focus of the channel. But it doesn’t mean there won’t be any further videos and articles on the RCZ. However, the MotorScotti website, YouTube channel and Facebook page have always been about my passion for cars and motorcycles. For the time being, the Pontiac is in pole position. Watch the video and you’ll know what’s to be expected over the next several months! 🙂

WordPress.com.

Up ↑